Printer Driver Settings
Installable Options
Parameters Settings
Paper Source Unit
Select Unit 3 if an optional 500-sheet paper cassette unit for the printer
has been installed.
Default: Disabled
Storage
Select None or HDD for the storage unit that is installed.
Do not select CF(1GB Over), because the printer does not support
CompactFlash cards.
Default: None
Duplex Unit
Select Enabled if the duplex unit for the printer has been installed.
Default: Disabled
Printer Memory
Select 256 MB or 768 MB if an optional memory for the printer has been
installed.
Default: 256 MB
General
Parameters Settings
Nearest Size and Scale If no paper tray contains paper of the specified size, the page is
automatically enlarged or reduced and paper of the most appropriate
size is selected.
Default: Off
Resolution Displays the image resolution (High Quality) for printing.
Paper Type Specifies the paper type.
Default: Printer Default
Paper Source Specifies the paper source.
Default: Tray 1
Manually Print on 2nd side Select whether or not to print on the back side of paper that has already
been printed on.
Default: Off
Paper Sizes Specifies the paper size. An irregular paper size cannot be selected.
AcuLaser C3900 Reference Guide
Operation on Linux 30
To Next Page
Loading...
