Epson AcuLaser C3900N - Page 31

Parameters Settings
Collate
If On is selected, all pages in the documents are printed as sets of
printouts.
Default: Off
Duplex Options Specifies the duplex print binding position, if the duplex unit for the
printer has been installed.
Default: Simplex
Select Color
Specifies the color for printing as Color or Grayscale.
Default: Color
Color Separation Specifies the color separation.
Default: Off
Brightness Specifies the brightness of the image.
Default: 0%
Edge Strength Set the edge strength.
Default: Middle
Economy Print Select whether or not economy printing is used.
Default: Off
Auto Trapping Select whether or not neighboring colors are printed superimposed in
order to prevent white space around images.
Default: Off
Black Over Print Specify whether black objects are printed (superimposed) on a
neighboring color in order to prevent white space around black
characters or figures.
If Text/Figure is selected, superimposed printing is applied to text and
graphics.
If Text is selected, superimposed printing is applied to text.
Default: Off
Image Options/Text Options/Graphics Options
Parameters Settings
Image RGB Source/Text RGB Source/
Graphics RGB Source
Specifies RGB source for image/text/graphic as None, sRGB, Adobe RGB
(1998), Apple RGB, ColorMatch RGB, or Blue Adjust RGB.
Default: sRGB
AcuLaser C3900 Reference Guide
Operation on Linux 31