Epson AcuLaser C3900N - Ipv6 Settings

Item Description
DNS Server Automatic
Acquisition
Select whether or not the DNS server address is automatically acquired from the DHCP
server to overwrite the current setting.
Choices: Enable, Disable
Default: Enable
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
*
Always enter these addresses without leading zeros. For example, 131.011.010.001 should be entered as 131.11.10.1.
IPv6 Settings
For more information on these TCP/IP, see Chapter 4 “Network Printing ” on page 49.
Item Description
IPv6 Select whether or not IPv6 is used.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - IPv6 - ENABLE
IPv6 Auto Setting Select whether or not the IPv6 auto setting is used.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - IPv6 - AUTO SETTING
IPv6 Link Local Address Displays IPv6 Link Local Address.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - IPv6 - LINK LOCAL
IPv6 Global Address Specifies the IPv6 Global Address.
Range: 4 to 43 characters
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - IPv6 - GLOBAL ADDRESS
Note:
When IPv6 Auto Setting is set to Enable, this item is not applied, even if the setting is
changed.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 123