Item Description
IPv6 Gateway Address Specifies the IPv6 Gateway Address.
Range: 6 to 39 characters
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - IPv6 - GATEWAY ADDRESS
Note:
When IPv6 Auto Setting is set to Enable, this item is not applied, even if the setting is
changed.
DHCPv6 Select whether or not DHCPv6 is used.
Choices: Enable, Disable
Default: Enable
DNS Server Automatic
Acquisition
Select whether or not the DNS server address is automatically acquired from the DHCPv6
server to overwrite the current setting.
Choices: Enable, Disable
Default: Enable
Search Domain Name
Automatic Acquisition
Select whether or not the DNS search domain name is automatically acquired from the
DHCPv6 server to overwrite the current setting.
Choices: Enable, Disable
Default: Enable
NTP Server Automatic
Acquisition
Select whether or not the SNTP server address is automatically acquired from the DHCPv6
server to overwrite the current setting.
Choices: Enable, Disable
Default: Enable
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
RAW Port Settings
For more information on these TCP/IP, see Chapter 4 “Network Printing ” on page 49.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 124
To Next Page
Loading...
