Epson AcuLaser C3900N - Interface Information

Item Description
Remaining Displays the amount of space remaining on the hard disk.
If no optional storages are installed, “-” are displayed.
Interface Information
Item Description
Protocol
Information
TCP/IP
If Enable is displayed, TCP/IP is enabled.
IPv6
If Enable is displayed, IPv6 is enabled.
Bonjour
If Enable is displayed, Bonjour is enabled.
FTP
If Enable is displayed, FTP is enabled.
Dynamic DNS
If Enable is displayed, Dynamic DNS is enabled.
IPP
If Enable is displayed, IPP is enabled.
LPD
If Enable is displayed, LPD is enabled.
RAW Port
If Enable is displayed, RAW Port is enabled.
SLP
If Enable is displayed, SLP is enabled.
SMTP
If Enable is displayed, SMTP is enabled.
SNMP
If Enable is displayed, SNMP is enabled.
WSD Print
If Enable is displayed, WSD Print is enabled.
LLTD
If Enable is displayed, LLTD is enabled.
LLMNR
If Enable is displayed, LLMNR is enabled.
AppleTalk
If Enable is displayed, AppleTalk is enabled.
NetWare
If Enable is displayed, NetWare is enabled.
IEEE802.1x
If Enable is displayed, IEEE802.1x is enabled.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 73