Epson AcuLaser C3900N - Page 122

Item Description
Auto IP Specifies the automatic assigning method for the printer IP address.
Choices: DHCP, BootP, ARP/PING
Default: DHCP
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - DHCP, BOOTP, ARP/PING
IP Address* Sets the printer’s IP address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
Note:
If the specified IP address is outside of the allowable range, the value is not changed, even
after the Apply button is clicked. The setting returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - IP ADDRESS
Subnet Mask* Sets the printer’s subnet mask address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
Note:
If the specified subnet mask address is outside of the allowable range, the value is not
changed, even after the Apply button is clicked. The setting returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - SUBNET MASK
Default Gateway* If a router is used on the network, sets the router’s address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
Note:
If the specified router address is outside of the allowable range, the value is not changed,
even after the Apply button is clicked. The setting returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - DEFAULT GATEWAY
Domain Name Automatic
Acquisition
Select whether or not the default DNS domain name is automatically acquired from the
DHCP server to overwrite the current setting.
Choices: Enable, Disable
Default: Enable
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 122