Epson AcuLaser C3900N - Page 108

Item Description
Tray2 Paper Size Specifies the setting for the size of paper loaded into Tray 2.
Default: A4
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY2 - PAPER SIZE
Width
Specifies the paper width when Paper Size is set to Custom
Size.
Range: 3.63 - 8.50 (inch) / 92 - 216 (mm)
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY2 - CUSTOM SIZE - WIDTH
Length
Specifies the paper length when Paper Size is set to Custom
Size.
Range: 5.83 - 11.69 (inch) / 148 - 297 (mm)
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY2 - CUSTOM SIZE - LENGTH
Paper Type Specifies the setting for the type of paper loaded into Tray 2.
Choices: Any, Plain Paper, Recycled, Thick 1, Thick 2, Label,
Postcard, Letterhead, Glossy 1, Glossy 2, Single Side Only, Special
Paper
Default: Plain Paper
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY2 - PAPER TYPE
Tray3
This item appears only if
an optional 500-sheet
paper cassette unit is
installed.
Paper Size Displays the setting for the size of paper loaded into Tray 3.
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY3 - PAPER SIZE
Paper Type Specifies the setting for the type of paper loaded into Tray 3.
Choices: Any, Plain Paper, Recycled, Single Side Only, Special
Paper
Default: Plain Paper
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY3 - PAPER TYPE
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 108