Item Description
Tray Chaining Tray Chaining
If Enable is selected and the specified paper tray runs out of
paper during printing, a paper tray loaded with paper of the same
size is automatically selected so printing can continue.
If Disable is selected and the specified paper tray runs out of
paper, printing stops.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY CHAINING
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Tray Mapping Settings
Item Description
Tray Mapping Mode Select whether or not the Tray Mapping function is used.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY MAPPING - TRAY MAPPING MODE
Logical Tray 0-9 Select the tray that is used for printing when a print job is received from another
manufacturer’s printer driver.
The default setting for Logical Tray 1 is Physical Tray 1. The default setting for all
other trays is Physical Tray 2.
Choices: Physical Tray 1, Physical Tray 2, Physical Tray 3
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY MAPPING - LOGICAL TRAY0-9
Note:
Physical Tray 3 appears only if an optional 500-sheet paper cassette unit is
installed.
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 109
To Next Page
Loading...
