Epson AcuLaser C3900N - Page 110

PCL Settings
Item Description
Font Number Sets the default font in the PCL language.
Range: 0 - 102
Default: 0
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - FONT NUMBER
Symbol Set Selects the symbol set used with the PCL language.
Default: PC-8
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - SYMBOL SET
Lines Per Page Selects how many lines are in a page in PCL language.
Range: 5 - 128
Default: 60
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - PCL - LINES PER PAGE
Font Point Size Sets the font size in the PCL language.
Range: 4.00 - 999.75
Default: 12.00
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - POINT SIZE
Font Pitch Size Sets the font pitch in the PCL language.
Range: 0.44 - 99.99
Default: 10.00
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - PITCH SIZE
CR/LF Mapping Selects CR/LF code definition in PCL language.
Choices: CR=CR LF=LF, CR=CRLF LF=LF, CR=CR LF=LFCR, CR=CRLF LF=LFCR
Default: CR=CR LF=LF
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - PCL - CR/LF MAPPING
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 110