PS Settings
Item Description
Wait Timeout Sets Postscript timeout. “0” means that no time-out control is effective.
Range: 0 - 300 (in seconds)
Default: 0
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - POSTSCRIPT - WAIT TIMEOUT
PS Protocol Specifies the PS protocol.
Choices: Auto, Normal, Binary
Default: Auto
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - POSTSCRIPT - PS PROTOCOL
Print to PS Error Specifies whether or not error printing is performed.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - POSTSCRIPT - PS ERROR PAGE
Auto Trapping Select whether or not neighboring colors are printed superimposed in order to
prevent white space around images.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - POSTSCRIPT - AUTO TRAPPING
Black Overprint Specify whether black objects are printed (superimposed) on a neighboring color
in order to prevent white space around black characters or figures.
If Text/Graphic is selected, superimposed printing is applied to text and
graphics.
If Text is selected, superimposed printing is applied to text.
Choices: Text/Graphic, Text, Off
Default: Off
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION - POSTSCRIPT - BLACK OVERPRINT
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 111
To Next Page
Loading...
