Epson AcuLaser C3900N - Page 118

Item Description
Calibration
Settings
Tone Calibration
If On is indicated, image adjustments are applied.
Choices: On, Off
Default: On
Configuration Menu Equivalent:
QUALITY MENU - CALIBRATION - TONE CALIBRATION
Cyan/Magenta/Yellow/
Black Density (Highlight)
Specifies the density of the highlight color.
Choices: +3, +2, +1, 0, -1, -2, -3
Default: 0
Configuration Menu Equivalent:
QUALITY MENU - CALIBRATION - CMYK DENSITY - CYAN/MAGENTA/
YELLOW/BLACK - HIGHLIGHT
Cyan/Magenta/Yellow/
Black Density (Middle)
Specifies the density of the middle color.
Choices: +3, +2, +1, 0, -1, -2, -3
Default: 0
Configuration Menu Equivalent:
QUALITY MENU - CALIBRATION - CMYK DENSITY - CYAN/MAGENTA/
YELLOW/BLACK - MIDDLE
Cyan/Magenta/Yellow/
Black Density (Shadow)
Specifies the density of the shadow color.
Choices: +3, +2, +1, 0, -1, -2, -3
Default: 0
Configuration Menu Equivalent:
QUALITY MENU - CALIBRATION - CMYK DENSITY - CYAN/MAGENTA/
YELLOW/BLACK - SHADOW
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Download Font/Form
Note:
This page appears only if an optional hard disk drive is installed.
PS Font
Note:
The printer must have an optional hard disk drive to use the PS Font parameters described below.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 118