Item Description
Authentication
Algorithm for AH
When AH is selected for Security Protocol, specify the AH authentication algorithm.
Choices: MD5, SHA-1
Default: MD5
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Cancel button
Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
IPsec (IPsec Peer Settings)
Item Description
No. Displays the number (No.) to be registered.
Perfect Forward Secrecy
To increase the IKE strength, select Use.
Choices: Not Use, Use
Default: Not Use
Peer’s Address Specify the IP address of the peer.
Range: 2 to 39 characters
Pre-Shared Key Specify the Pre-Shared Key text shared with the peer.
Range: Up to 64 characters
Encapsulation Mode Specify the operation mode of IPsec.
Choices: Not Use, Tunnel Mode, Transport Mode
Default: Not Use
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Cancel button
Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 130
To Next Page
Loading...
