Epson AcuLaser C3900N - Page 138

FTP
Server
Item Description
FTP Server Enables or Disables the FTP server.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - FTP - ENABLE
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
SNMP
Item Description
SNMP SNMP
If Enable is selected, SNMP is enabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - SNMP - ENABLE
SNMP v1/v2c(IP)
If Enable is selected, SNMP v1/v2c(IP) is enabled.
Choices: Enable, Disable
Default: Enable
SNMP v3(IP)
If Enable is selected, SNMP v3(IP) is enabled.
Choices: Enable, Disable
Default: Enable
SNMP v1(IPX)
If Enable is selected, SNMP v1(IPX) is enabled.
Choices: Enable, Disable
Default: Enable
UDP Port Specifies the UDP port number.
Range: 1 - 65535
Default: 161
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 138