Epson AcuLaser C3900N - Page 149

IEEE802.1x
Item Description
IEEE802.1x Select whether to enable or disable the IEEE802.1x function.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - IEEE802.1X - ENABLE
EAP Type Select the type of authentication used with IEEE802.1x.
Choices: None, EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP, Server Specification
Default: None
User ID
Specifies the account name, when EAP Type is set to EAP-MD5, EAP-TLS,
EAP-TTLS, PEAP, LEAP or Server Specification.
Range: Up to 128 characters
Password
Specifies the password, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS,
PEAP, LEAP or Server Specification.
Range: Up to 128 characters
TTLS Anonymous Name Specify the logon name used with EAP-TTLS primary authentication. Specifies the
TTLS anonymous name, when EAP Type is set to EAP-TTLS or Server
Specification.
Range: Up to 128 characters
Default: anonymous
Note:
If EAP Type is set to Server Specification while the actual authentication
method is EAP-MD5, type in the same name as the User ID.
TTLS Authentication Type Specify the EAP-TTLS phase 2 authentication procedure. Specifies the TTLS
anonymous type, when EAP Type is set to EAP-TTLS or Server Specification.
Choices: PAP, MS-CHAP, MS-CHAPv2
Default: MS-CHAPv2
Server Certificate Check Specify the items where the server certificate is verified. Specifies the server
certificate check, when EAP Type is set to EAP-TLS, EAP-TTLS or PEAP.
Choices: Validity, CA Chain, Server ID
Default: Validity
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 149