Epson AcuLaser CX17 Series User Manual

If you use wired connection, ensure that the Ethernet cable is connected between the printer and
the network.
If you use wireless connection, ensure that wireless connection is configured properly on your
computer and printer.
3. Display System Preferences, and then click Print & Fax.
4. Click the plus (+) sign, and then click IP.
5. Select Line Printer Daemon - LPD for Protocol.
6. Enter the IP address of the printer in the Address area.
Name and Print Using are automatically entered.
Note:
When the printing is set up using IP printing, the queue name is displayed as blank. You do not need
to specify it.
7. Click Add.
Adding a Printer on Mac OS X 10.4
When Using a USB Connection
1. Turn off the printer and your computer.
2. Connect the printer and your computer with the USB cable.
3. Turn on the printer and your computer.
4. Start Printer Setup Utility.
Note:
You can find Printer Setup Utility in the Utilities folder in Applications.
5. Confirm your USB printer is added to Printer List.
If your USB printer is not displayed, execute the following procedures.
6. Click Add.
Epson AcuLaser CX17 Series User’s Guide
Printer Connection and Software Installation 110

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English