Epson AcuLaser CX17 Series User Manual

Phone Book (Epson AcuLaser CX17NF/CX17WF Only)
Use the Phone Book menu to configure the speed dial and group dial settings.
Speed Dial
Purpose:
To store up to 99 frequently dialed numbers in speed dial locations.
Note:
The first eight entries are assigned to the one-touch buttons on the operator panel.
See Also:
“Storing a Number for Speed Dialing” on page 235.
Group Dial
Purpose:
To create a group of fax destinations and register it under a 2-digit dial code. Up to 6 group dial codes
can be registered.
See Also:
“Setting Group Dial” on page 237.
Network (Epson AcuLaser CX17NF/CX17WF Only)
Use the Network menu to change the printer settings affecting jobs sent to the printer through the
network.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes
effective after the printer is turned off and then on.
Values:
Auto*
Detects the Ethernet settings automatically.
10BASE-T Half
Uses 10base-T half-duplex.
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 252

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English