Epson AcuLaser CX17 Series User Manual

Values:
Manual Setup Enter Network
(SSID)
Specify a name to identify the wireless network. Up to 32 alphanumeric char-
acters can be entered.
Infrastructure
Select when you configure the wireless setting through the access point such
as a wireless router.
No Security Specify No Security to configure the wireless setting
without specifying a security method from WEP,
WPA-PSK-TKIP, WPA-PSK-AES and WPA2-PSK-AES.
WEP(64Bit)
Specify the WEP 64bit Key to use through the wireless
network. Enter 10 hexadecimal characters.
Transmit Key Specify the transmit key from WEP
Key 1, WEP Key 2, WEP Key 3, and
WEP Key 4.
WEP(128Bit)
Specify the WEP 128bit Key to use through the wireless
network. Enter 26 hexadecimal characters.
Transmit Key Specify the transmit key from WEP
Key 1, WEP Key 2, WEP Key 3, and
WEP Key 4.
WPA-PSK-TKIP
Select to configure the wireless setting with the security
method of WPA-PSK-TKIP.
PassPhrase
Entry
Specify the pass phrase of
alphanumeric characters from 8 to 63
only when WPA-PSK-TKIP is selected
for Encryption Type.
WPA-PSK-AES
Select to configure the wireless setting with the security
method of WPA-PSK-AES.
PassPhrase
Entry
Specify the pass phrase of
alphanumeric characters from 8 to 63
only when WPA-PSK-AES is selected
for Encryption Type.
WPA2-PSK-AES
Select to configure the wireless setting with the security
method of WPA2-PSK-AES.
PassPhrase
Entry
Specify the pass phrase of
alphanumeric characters from 8 to 63
only when WPA2-PSK-AES is selected
for Encryption Type.
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 254

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English