Epson AcuLaser CX17 Series User Manual

Port 9100 Disable
Disables the Port 9100 port.
Enable*
Enables the Port 9100 port.
WSD Disable
Disables the WSD port.
Enable*
Enables the WSD port.
SNMP Disable
Disables the Simple Network Management Protocol (SNMP) UDP port.
Enable*
Enables the SNMP UDP port.
StatusMessenger Disable
Disables the StatusMessenger feature.
Enable*
Enables the StatusMessenger feature.
InternetServices Disable
Disables an access to EpsonNet Config embedded in the printer.
Enable*
Enables an access to EpsonNet Config embedded in the printer.
LLTD Disable
Disables the LLTD.
Enable*
Enables the LLTD.
Bonjour(mDNS) Disable
Disables the Bonjour (mDNS).
Enable*
Enables the Bonjour (mDNS).
Initialize NVM
Purpose:
To initialize wired network data stored in Non-Volatile Memory (NVM). After executing this
function and rebooting the printer, all wired network settings are reset to their default values.
Values:
Yes
Initializes the wired network data stored in NVM.
No*
Does not initialize the wired network data stored in NVM.
Fax Settings (Epson AcuLaser CX17NF/CX17WF Only)
Use the Fax Settings menu to configure the basic fax settings.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 257

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English