Epson AcuLaser CX17 Series - Page 268

Fault Time-Out
Purpose:
To specify the time taken by the printer before it cancels jobs that stop abnormally. The job is cancelled
if it times out.
Values:
Off
Disables the fault time-out.
On 60sec*
Specifies the time taken by the printer before it cancels for jobs that
stop abnormally.
3–300sec
Job Time-Out
Purpose:
To specify the amount of time that the printer waits for data to arrive from the computer. The print job
is cancelled if it times out.
Values:
Off
Disables the job time-out.
On 30sec*
Specifies the amount of time that the printer waits for data to arrive
from the computer.
5–300sec
Clock Settings
Purpose:
To set the date and time, and regional time zone of the printer.
Values:
Set Date
Specifies the current date.
Set Time
Specifies the current time.
Date Format yy / mm / dd
Specifies the date format.
mm / dd / yy
dd / mm / yy*
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 268