Epson AcuLaser CX17 Series User Manual

Adjust BTR
Purpose:
To specify the optimum voltage settings for printing for the transfer roller (BTR). To lower the voltage,
set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the print
output, try to increase the voltage. If you see white spots on the print output, try to decrease the
voltage.
Note:
The print quality changes depending on the values you select for this item.
Values:
Plain 0*
-3 – +3
Bond 0*
-3 – +3
Light Card 0*
-3 – +3
LW Gloss Card 0*
-3 – +3
Labels 0*
-3 – +3
Recycled 0*
-3 – +3
Envelope 0*
-3 – +3
Adjust Fusing Unit
Purpose:
To specify the optimum temperature settings for printing for the fusing unit. To lower the
temperature, set negative values. To increase, set positive values.
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 272

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English