The Printer Setup Utility screen appears.
3. Select the printer to be configured in the “Select Printer” screen, and then click Next.
Note:
If the printer to be configured is not listed in the “Select Printer” screen, try the following steps:
❏ Click Refresh to update the information.
❏ Click Enter IP Address, and then enter the IP address of your printer.
4. Enter the SSID.
5. Select Type of wireless network.
6. Configure the security setting, and then click Next.
The “IP Address Settings” screen appears.
7. Select IP Mode depending on your network scheme.
When IPv4 is selected, configure the following:
Epson AcuLaser CX17 Series User’s Guide
Printer Connection and Software Installation 70
To Next Page
Loading...
