Epson AcuLaser CX17 Series - Page 71

a
Select Type.
b
If you have selected Use Manual Address from Type, enter the following items:
❏ IP Address of your printer
❏ Subnet Mask
❏ Gateway Address
When Dual Stack is selected, configure the following:
a
Configure IPv4 Settings.
b
If you have selected the Use Manual Address check box under IPv6 Settings, enter the
following items:
❏ IP Address of your printer
❏ Gateway Address
8. Click Next.
Epson AcuLaser CX17 Series User’s Guide
Printer Connection and Software Installation 71