B
Select "Arc Correction" and prses the [Enter] button.
Press the [Enter] button again, and the screen below appears, to select
one of the 8 vertical/horizontal areas and corners.
C
Use the [h] button on the remote control or the [w/ ], [v/
], [</ ], and [>/ ] buttons on the control panel to select
the area you want to adjust, and then press the [Enter] button.
When selecting a corner, you can adjust the two sides next to the
corner.
D
To adjust the shape, use the [h] button on the remote control
or the [
w/ ], [v/ ], [</ ], and [>/ ] buttons on the control
panel.
Adjusting the Projected Image
144
To Next Page
Loading...
Need help?
General
