If the receiver (base unit or supported projector) is not working properly, turn it
o,
unplug it, and then plug it back in and turn it on.
If this does not solve the problem, check the following:
•
e indicators on the receiver and the wireless transmitter may indicate the
problem.
•
e solutions in this manual can help you solve many problems.
If none of these solutions help, contact Epson for technical support.
If you are using the Wireless Presentation System (ELPWP10) with a
su
pported projector, see the User's Guide for the projector.
Projection Problems
104
To Next Page
Loading...
