Epson ELPWP10 User Manual

Normally the projector automatically detects and optimizes the input signal
set
tings. If you need to customize the settings, you can use the Signal I/O menu.
e available settings depend on the currently selected input source.
Setting Options Description
HDMI IN EQ Level HDMI1
HDMI2
Adjusts the HDMI input signal level
depending on the devices connected to
the HDMI port. If there is a lot of
interference in the image, or if a problem
such as no image being displayed occurs,
change the setting.
HDMI Out
In
tensity
O
Low
Medium
High
Adjusts the signal intensity input from
the HDMI port. Change this setting when
you cannot display the image output from
the HDMI port correctly.
Setting Options Description
Audio Output Port HDMI Out
Audio O
ut
Sets the audio output port when
displaying images.
HDMI Link On
O
Set to On to enable the HDMI Link
f
eatures.
Power O Link On
O
I
f this is set to On, when the receiver is
turned o, the connected external display
device is also turned o.
Reset Signal I/O
Set
tings
— Resets all adjustment values on the Signal
I/O menu to their default settings.
Input Signal Settings - Signal I/O Menu
83

Epson ELPWP10 Specifications

General

Brand	Epson
Model	ELPWP10
Category	Projector Accessories
Language	English