Settings on the Ini
tial/All Settings menu let you reset certain base unit settings
to their default values and place the base unit in rmware update mode so you
can update the rmware.
Setting Options Description
Reset All — Lets you select menus for resetting the
settings to default values.
Firmware Update — Enters the rm
ware update mode and
ready to update rmware using the USB-
A or Service port.
Export Batch
Set
tings
— Exports the base unit's menu settings to
a USB ash drive or a computer, allowing
you to copy them to other base units of
the same model.
Import Batch
Set
tings
— Imports menu settings that have been
saved to a USB ash drive or a computer.
Reset All options
Wh
en you select Reset All, you see the following screen.
If you do not want to reset values in particular menus, deselect the check box
next t
o the menu name. When you are ready to reset setting values, select
Execute.
You cannot reset the following settings:
•
Language
Attention
If y
ou perform Reset All, all of the passwords that have been set for the Network
menu are also reset and you need to set them again. To prevent the passwords
from being reset by unauthorized users, set Network to On in the Menu Protection
menu.
For the Network menu, if you turn on the Menu Protection setting, the
s
ettings do not return to their default values when using the Reset All
option.
g
Related Links
•
"U
pdating the Firmware" p.100
Base Unit Initial Settings and Reset Options - Initial/All Settings Menu
94
To Next Page
Loading...
