Epson RC700-A User Manual

Maintenance 9. Troubleshooting
RC700 / RC700-A Rev.23 185
No.
Message
Remedy
Note 1
Note 2
1863
The parameter is invalid.
-
1864
Initialization failure.
Virtual controller does not exist.
Installation of the EPSON RC+ 7.0
failed. Reinstall the software.
1865
Initialization failure.
Failed to start virtual controller.
1. Retry after a while.
2. Reboot the PC.
1867
Cannot execute because it is not
dry run mode.
Dry run mode is invalid.
Enable the dry run.
1868
Initialization failure.
Directory cannot be found.
Installation of the EPSON RC+ 7.0
failed. Reinstall the software.
1872
Connection failure.
Files for simulator that used real
controller cannot be found.
-
1873
Connection failure.
Files for simulator that used virtual
controller cannot be found.
-
1874 Virtual Controller cannot be added.
Installation of the EPSON RC+ 7.0
failed. Reinstall the software.
1875
Simulator Object failure.
Cannot load data for the simulator
object.
-
1876
Simulator Object failure.
Cannot read data for the simulator
object.
-
1877
Simulator Object failure.
Cannot remove data from the
simulator object.
-
1878
Simulator Object failure.
Cannot update data for the
simulator object.
-
1879
Other virtual controllers are
starting.
Other virtual controllers may be used
in the EPSON RC+ 5.0.
Or, the virtual controller may be
already used in another EPSON
RC+7.0.
1880
Cannot execute during controller
reset.
-
1901
Unsupported.
Unsupported command was
attempted.
Update the firmware.
1902
Unsupported.
Unsupported parameter was
specified.
-
1903 System error. -
1910
System error.
Failed to write the reboot file.
-

Epson RC700-A Specifications

General

Brand	Epson
Model	RC700-A
Category	Controller
Language	English