Epson Stylus Color 1160 - Page 101

EPSON Stylus COLOR 860/1160 Revision C
Disassembly and Assembly Disassembly Procedures 101
8) Using tweezers, carefully take out the right and left compression springs
1.961 that are fixed between the Paper Feed Roller Assembly and the
Hopper Assembly. Refer to Figure 4-41.
9) Lift up the right Paper Feed Roller Assembly a little to release the right end
of the LD Roller Shaft, and move the LD Roller Shaft to the right.
Then remove it from the hole in the left side of the ASF Frame.
10) Remove the Left Hopper Release Lever from the left end of the LD Roller
Shaft.
11) Remove the Paper Feed Roller Assembly from the LD Roller Shaft.
Figure 4-37. Disassembling the ASF Assembly
(for SC860)