Epson Stylus Color 1160 - Service Checks after Repair

EPSON Stylus COLOR 860/1160 Revision C
Disassembly and Assembly Overview 78
4.1.4 Service Checks After Repair
Before returning the printer after servicing, use the check list below, which
enables you to keep record of servicing and shipping more efficiently.
Table 4-3. Inspection Checklist for the Repaired Printer
Category Component Item to check Is Check Required?
Printer units
Self-test Is the operation normal? oChecked / oNot necessary
On-line test Was the on-line test successful? oChecked / oNot necessary
Printhead Is ink ejected normally from all nozzles? oChecked / oNot necessary
Carriage
mechanism
Does the carriage move smoothly? oChecked / oNot necessary
Any abnormal noise during movement? oChecked / oNot necessary
Any dirt or obstacles around the shaft of carriage
guide?
oChecked / oNot necessary
Is the CR motor at the correct temperature
(not over heating)?
oChecked / oNot necessary
Paper feeding
mechanism
Is paper fed smoothly? oChecked / oNot necessary
Does paper get jammed? oChecked / oNot necessary
Does paper get skew during paper feeding? oChecked / oNot necessary
Are papers multi fed? oChecked / oNot necessary
Does the PF motor get overheated? oChecked / oNot necessary
Abnormal noise during paper feeding? oChecked / oNot necessary
Is the paper path clear of all obstructions? oChecked / oNot necessary
Adjustment Specified adjustment items Are adjusted conditions all right? oChecked / oNot necessary
Lubricant Specified lubricated item
Is lubrication applied to the specified locations? oChecked / oNot necessary
Is the quantity of lubrication adequate? oChecked / oNot necessary
Function ROM version Newest version: oChecked / oNot necessary
Shipment
package
Ink cartridges are the ink cartridges installed correctly? oChecked / oNot necessary
Protection conditions during
transport
Is all the pointed parts firmly fixed? oChecked / oNot necessary
Others Attached items Are all attached items from users included? oChecked / oNot necessary