Epson Stylus Color 1160 - Removing the Right and Left LD Roller Assembly

EPSON Stylus COLOR 860/1160 Revision C
Disassembly and Assembly Disassembly Procedures 104
4.2.4.6.2 Removing the Right and Left LD Roller Assembly
1. Disassemble the ASF assembly and remove the Paper Feed Roller
Assembly and Hopper Assembly from the ASF Assembly. (Refer to
Section 4.2.4.6.)
2) Release the two hooks fixing the LD Roller Cover to the Paper Feed Roller
Assembly. Refer to Figure 4-42.
3) Release the two hooks fixing the LD Roller Assembly around the shaft hole
of the Paper Feed Roller Assembly. Refer to Figure 4-42.
Figure 4-42. Releasing hooks for LD Roller
CHECK
POINT
n When installing the LD roller assembly, make sure that the
hooks are hung on the Paper Feed Roller Assembly.
n Do not touch the surface of the LD Roller with hand.
Hooks for the LD
Roller Assembly
Hooks for the LD
Roller Cover