Epson Stylus Color 1160 - Market Destination Check

EPSON Stylus COLOR 860/1160 Revision C
Adjustment Adjustment 127
5.2.3.4 Market Destination Check
This function is just to check the market destination setting stored in the
EEPROM. Any CG chip is not mounted on the Main board and only 2
character tables (PC437, PC850) is stored in the PROM.
And the default setting is always set as PC437 in the EEPROM in our
manufactory. So, in case you perform this function, the following figure
is displayed.
Figure 5-10. Checking the present market destination
NOTE: In order to cancel the above menu, choose another menu or
adjustment items.