EPSON Stylus COLOR 860/1160 Revision C
Adjustment Adjustment 132
3. The following check pattern is printed.
Figure 5-18. Head Angular adjustment pattern.
4. Choose the “Move the carriage to the head angular adjustment” in
the “Head angular adjustment “menu and click the “OK” button as
following figure. The printer moves to the I/C replacement position
and stops at the position.
Figure 5-19.
Choose the Move the carriage to the head angular adjustment
5. Loosen the printhead securing screw securing the printhead on the
carriage. (You don't need to remove it completely.)
Figure 5-20. Head fixing screw position
NOTE: Loosen the printhead securing screw securing the printhead
on the carriage. (You don't need to remove it completely.)
To Next Page
Loading...
