Epson Stylus Color 1160 - Page 144

EPSON Stylus COLOR 860/1160 Revision C
Adjustment Adjustment 144
[ Clear the protection counter value ]
1. Choose the “Clear the protection counter value” in the
“Maintenance” menu and click the “OK” button.
Figure 5-45. Choose the Clear the protection counter value
2. By clicking the “OK” button, the following menu is displayed.
Figure 5-46. Clear the Protection counter value
3. After you read the description on the menu, click the “OK” button.
When the “OK” button is clicked, the following message is displayed
on the bottom column in the menu.
Figure 5-47. Clear the protection counter value 2
CAUTION
n Be sure to replace the installed waste ink pad with a
new one after or before you clear the current
protection counter value.