Maintenance and Transportation Page 117
Transporting the Printer
If you want to move your printer some distance, you need to
prepare it for transportation and repack it in the original box. Follow
these steps:
1 Turn on the printer and wait until the print head locks in the far
right position. Then turn off the printer.
2 Unplug the power cord from the electrical outlet. Then
disconnect the interface cable from the printer.
3 Remove any paper from the sheet feeder and remove the
paper support.
4 Push in the output tray extensions and close the tray.
5 Repack the printer and attachments in the original box using
the protective materials that came with it. See the Unpacking
Sheet that was packed with the printer.
Be sure to keep the printer flat as you transport it. If you notice a
decline in print quality after transporting the printer, clean the print
head (see Cleaning the Print Head); if output is misaligned, align
the print head. See Aligning the Print Head.
To Next Page
Loading...
Need help?
General