Troubleshooting Page 135
The printer has finished charging the ink cartridge, but the
P
power light is still
flashing
Solving Printer Software Problems
If you have trouble with your printer software, first check that your
printer is selected as the default Windows printer; see your
Printer
Basics
guide.
If you still have problems with your printer software, check the
following solutions. If you need to uninstall the printer software, see
Uninstalling Printer Software.
Possible cause Solution
The ink cartridge
clamp isn’t locked
down.
Press down on the clamp to lock it into place.
Packing material
remains in the printer.
Remove the packing material, following the instructions on the
Unpacking Sheet in the box.
The printer needs to
initialize.
If the printer is not moving or making noise, but the light is still flashing
after 5 minutes have passed, turn the printer off. If the light is still flashing
when you turn it back on, contact EPSON as described in Where To Get
Help.
The printer may be
receiving data from the
computer.
Turn the printer and computer off. Disconnect the printer from the
computer. Turn the printer on. If the light continues to flash for more than
5 minutes, contact EPSON as described in Where To Get Help
.
To Next Page
Loading...
Need help?
General