Troubleshooting Page 134
A
B
black or
A
color ink out light is flashing or on
The
S
paper out and
P
power lights are flashing
All the lights are flashing
Possible cause Solution
If flashing, the ink
supply is getting low.
You need to replace the indicated ink cartridge soon. Make sure you
have a new cartridge, then see Replacing an Ink Cartridge
for
instructions.
If on, the ink cartridge
is empty.
You must replace the indicated ink cartridge; see Replacing an Ink
Cartridge for instructions.
Possible cause Solution
A carriage error has
occurred.
Remove any paper in the printer. Press the
E
load/eject button for about
30 seconds. Then press it again. Turn the printer off, wait a few seconds,
and then turn it on and try printing again. If the error is not cleared,
contact EPSON as described in Where To Get Help.
Possible cause Solution
You haven’t removed
all the packing
material from the
printer.
Remove the packing material, following the instructions on the
Unpacking Sheet in the box.
An internal error may
have occurred.
Turn off your printer, wait a few seconds, and turn it on again. If the lights
still flash or stay on, contact EPSON as described in Where To Get Help
.
To Next Page
Loading...
Need help?
General