Epson Stylus Color 440

Troubleshooting Page 133
The printer sounds as though it is printing, but nothing prints
The S paper out light is flashing or on
Your computer doesn’t
have enough memory
to handle the data in
the file you are
printing.
Try one of the following:
◗ Reduce the resolution of your image.
◗ Select fewer colors or a lower resolution for your monitor.
◗ Add more memory to your computer.
A print job is stalled. Delete the stalled print job(s) in Spool Manager; see Deleting a Stalled
Print Job for instructions.
Possible cause Solution
The print head
nozzles are clogged.
Clean the print head nozzles; see Cleaning the Print Head
for
instructions. If this does not work after two or three times, see below.
One or both of the ink
cartridges are too old.
Try cleaning the print head. If that doesn’t work, replace the ink
cartridges as described in Replacing an Outdated Ink Cartridge
.
Possible cause Solution
If flashing, paper is
jammed.
Remove the paper and follow the guidelines for preventing jams in Fixing
Paper Problems.
If on, paper is used up
or loaded incorrectly.
Load paper or remove the stack and reload it as described in the
Printer
Basics guide or Media Loading and Handling Guidelines. Then press the
E
load/eject button to turn off the light and resume printing.
Possible cause Solution