Managing Print Jobs Page 96
The Spool Manager window displays the status of your print
queues and print jobs and lets you control them. You can also
control the display of the Despooler and the default spool directory.
Click Help in the Spool Manager menu bar for detailed information.
Deleting a Stalled Print Job
If you’re having trouble printing, it may be because of a stalled print
job. Follow these steps to delete it and continue printing:
1 Open the Spool Manager as described above.
2 Click on any print jobs marked Held, then open the Document
menu and click Delete.
3 Click Yes.
4 Exit Spool Manager and try printing again.
Changing the Default Spool Directory
If you get an error message when you try to print, or printing is very
slow, you can try changing your default spool directory.
1 Make a directory on your hard disk where you want
Spool Manager to store print job files, for example,
C:\SPLTEMP.
2 Open the Spool Manager as described in Using the Spool
Manager.
3 Choose Default Spool Directory from the Options menu.
To Next Page
Loading...
Need help?
General