Epson Stylus Pro 9900 - Page 214

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 214
Confidential
4.4.2.10 Top Cover
1. Remove the IC Cover (L/R) and the IC Shaft Cover (L/R). (p206)
2. Remove the Maintenance Tank (L/R). (p208)
NOTE: There is no Maintenance Tank (L) mounted for the Epson Stylus Pro
7700/7710/7700M/7710M/7900/7910/WT7900/WT7910/7890/7908.
3. Remove the Control Panel. (p203)
4. Remove the Right Cover. (p209)
5. Remove the Left Cover. (p211)
6. Open the Front Cover (Middle).
7. Remove the eight screws that secure the Top Cover.
A) Silver, Phillips, Bind machine screw M4x10: eight pieces
8. Close the Front Cover (Middle), and remove the Top Cover.
Figure 4-26. Removing the Top Cover (1)
Figure 4-27. Removing the Top Cover (2)
A
Top Cover
Front Cover (Middle)
Top Cover
Front Cover (Middle)