Epson Stylus Pro 9900 - Page 220

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 220
Confidential
4.4.2.15 Rear Cover
1. Remove the two screws (one each) securing the AC Inlet and the USB I/F.
A) Silver, Phillips, Bind machine screw M3x6: two pieces
2. Remove the 12 screws that secure the Rear Cover.
B) Silver, Phillips, Bind machine screw M4x6: 12 pieces
3. Remove the Rear Cover.
Figure 4-35. Removing the Rear Cover
B
A
- As seen from the rear -
Rear Cover