Epson Stylus Pro 9900 - Page 233

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 233
Confidential
4.4.3.4 Sub Board Assy; B
1. Remove the Control Panel. (p203)
2. Remove the IC Cover R and the IC Shaft Cover R. (p206)
3. Remove the Maintenance Tank R. (p208)
4. Remove the Right Cover. (p209)
5. Disconnect all the cables and FFCs on the Sub Board Assy; B.
6. Remove the four screws, and remove the Sub Board Assy; B.
A) Silver, Phillips, Bind machine screw M3x6: four pieces
Figure 4-54. Connector locations
Figure 4-55. Removing the Sub Board Assy; B
CN200
CN216
CN202
CN214
CN223
CN213
CN229
CN222
CN224
CN207
CN204
CN227
CN219
CN206
CN205
CN218
CN217
CN201
CN220
CN226
CN221
A
- Right side -
Sub Board Assy; B