Epson Stylus Pro 9900 - Page 258

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 258
Confidential
11. Remove the two screws that secure the Cutter Cover Support, and remove the
Cutter Cover Support.
B) Silver, Phillips, Bind machine screw M3x6: two pieces
12. Remove the seven screws that secure the Mid-Front Cover, and remove the Mid-
Front Cover.
C) Black, Phillips, Bind machine screw M3x6: seven pieces
13. Hold up the lower part of the Cutter Motor Cover and slide it upwards to remove
the Cutter Motor Cover.
Figure 4-95. Removing the Mid-Front Cover
Cutter Motor Cover
Cutter Cover Support
B
C
- Top -
Mid-Front Cover
Mid-Front Cover