Epson Stylus Pro 9900 - Page 259

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 259
Confidential
14. Disconnect the connector (CN307) on the Sub Board Assy; C.
15. Release the harness from the clamp 1.
16. Release all the harnesses from the clamp 2.
Figure 4-96. Disconnecting the connector
Figure 4-97. Releasing the Harness
CN307
- Left side -
Sub Board Assy; C
- Left inside -
Clamp 1
Clamp 2