Epson Stylus Pro 9900 - Page 318

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 318
Confidential
4.4.7.5 Power Supply Board
1. Remove the Flange from the Auto Take-up Reel.
2. Remove the Take-up Reel Cover. (p313)
3. Remove the two screws that secure the Plate A, and remove the Plate A.
A) Black, Phillips, Bind S-tite M3x6: two pieces
4. Remove the two screws that secure the Plate B, and remove the Plate B.
B) Black, Phillips, Bind S-tite M3x6: one piece
C) Black, Phillips, Bind S-tite M4x8: one piece
Figure 4-179. Removing the Flange
Figure 4-180. Removing the Plate A/B
Flange
Auto Take-up Reel
A
B
C
Plate A
Plate B