Epson Stylus Pro 9900 - Page 317

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 317
Confidential
5. Disconnect the connector (CN17) on the Main Board.
6. Remove the four screws that secure the Take-up Reel Switch, and remove the
Take-up Reel Switch from the Panel Cover.
B) Black, Phillips, Bind P-tite screw M2x7 (bit: No.1): four pieces
Figure 4-178. Removing the Take-up Reel Switch
Install the Take-up Reel Switch with the “ON/OFF/ON”
inscription to the right. And install the Take-up Reel Switch
with “M” inscription to the Manual side.
Inscription
Take-up Reel Switch
Panel Cover
CN17
B
B
Main Board