Epson Stylus Pro 9900 - Page 316

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 316
Confidential
4.4.7.4 Take-up Reel Switch
1. Remove the Flange from the Auto Take-up Reel.
2. Remove the Take-up Reel Cover. (p313)
3. Disconnect the connector (CN1) on the Main Board.
4. Remove the four screws that secure the Power Supply Unit, and remove the Power
Supply Unit.
A) Black, Phillips, Bind S-tite M3x6: four pieces
Figure 4-176. Removing the Flange
Figure 4-177. Removing the Power Supply Unit
Flange
Auto Take-up Reel
A
A
A
A
Power Supply Unit
CN1
Main Board