Epson Stylus Pro 9900 - Page 343

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 343
Confidential
4.4.8.16 Cooling Fan 2
1. Remove the Color Measurement Device. (p325)
2. Remove the Mounter. (p327)
3. Remove the Front Cover. (p331)
4. Remove the Right Cover. (p328)
5. Remove the Left Cover. (p329)
6. Remove the two screws that secure the USB Housing, and remove the USB
Housing.
A) Black, Phillips, Bind machine screw M3x6: two pieces
7. Release all the harness from the clamps.
8. Remove the four screws that secure the plate.
B) Silver, Phillips, Bind S-tite with S.W & P.W. M3x6: four pieces
Figure 4-219. Removing the USB Housing
Figure 4-220. Releasing the harnesses
A
USB Housing
B
Clamps
Plate