Epson Stylus Pro 9900 - Page 345

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 345
Confidential
13. Remove the four screws that secure the Cooling Fan2, and remove the Cooling
Fan2.
G) Silver, Phillips, Bind S-tite with S.W & P.W. M3x12 & nut: four pairs
Figure 4-223. Removing the Cooling Fan 2 (2)
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 5 “Adjustment” (see p351) and perform
specified adjustments after replacing the Cooling Fan 2.
<Adjustment Item>
1. Counter Clear (FAN)
G
Cooling Fan 2