Epson Stylus Pro 9900 - Page 350

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 350
Confidential
4. Remove the E-ring.
5. Pull out the shaft.
6. Remove the O-ring, and remove the Paper Pressing Unit.
Figure 4-231. Removing the Paper Pressing Unit
First align the markings on the gears on the left and the right side of
the Paper Pressing Unit with the markings on the gears on the main
body, then install the Paper Pressing Unit.
Left side Right side
Paper Pressing Unit
E-ring
O-ring
Shaft