Epson Stylus Pro 9900 - Page 412

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT PF Related Adjustment 412
Confidential
19. Check that “11” is displayed on the Control Panel.
Carry out the adjustment if the displayed value is other than “11”.
→ Go to adjustment procedure
20. Press [Paper Set] to release the paper presser.
21. Check that “01” is displayed on the Control Panel while releasing the paper set.
Carry out the adjustment if the displayed value is other than “01”.
→ Go to adjustment procedure
22. After all the checking and adjustment, confirm all the values again.
Figure 5-69. Position for the thickness tool (0.4/0.8/0.9 in thickness)
Figure 5-70. Position for the thickness tool (0.5 in thickness)
Adjustment jig
Paper Feed Roller Assy on
second from right side
Setting direction
Adjustment jig
Paper Feed Roller Assy on
second from right side
Setting direction